What are the requirements for the storage environment of air mover blower

Air Mover Blower is an efficient air moving device, widely used in industrial, commercial and home environments, mainly used for multiple functions such as fast drying, dust removal and ventilation. In order to ensure its long-term stable operation and extend its service life, in addition to daily maintenance and care, a reasonable storage environment selection is also crucial.

Optimization of temperature and humidity management
The storage environment of Air Mover Blower should be kept within a suitable temperature and humidity range. Too high or too low temperature may cause irreversible damage to the electronic components, motors and plastic parts inside the device. The ideal storage temperature should be controlled between -10℃ and 40℃, avoiding long-term exposure to extreme temperature environments. In addition, relative humidity management is equally important. Excessive humidity may cause internal rust, corrosion or short circuit, while too low humidity may make plastic parts brittle and crack. Therefore, the relative humidity of the storage environment should be maintained between 30% and 80% to prevent excessive moisture or dryness.

Dust and anti-fouling measures
Dust and dirt are the main factors affecting the performance of Air Mover Blower. Being in a dusty environment for a long time will not only affect the appearance of the device, but also cause the air inlet and outlet to be blocked, thereby reducing the airflow effect and even causing the motor to overheat and damage. Therefore, the storage environment must be kept clean to avoid the accumulation of dust and dirt. It is recommended to cover the device with a dust cover or dustproof cloth when it is not in use to effectively reduce the intrusion of dust.

Avoid direct sunlight and rain
Direct sunlight and rain can cause significant damage to the Air Mover Blower. Direct sunlight may cause the surface of the device to fade and the plastic parts to age, while rain may cause water to enter the interior, causing short circuits or other damage. Therefore, the storage environment should avoid direct sunlight and rain, and ideally it should be stored indoors or in a place with sunshade and rainproof facilities.

The importance of ventilation and dry environment
Good ventilation and dry environment are essential for the storage of Air Mover Blower. Ventilation can maintain air circulation in the storage environment and reduce the accumulation of dust and moisture, while dryness can effectively prevent rust and corrosion inside the device. Therefore, the storage environment should be well ventilated to avoid moisture and mildew. If necessary, consider using a dehumidifier or desiccant to further ensure a dry storage environment.

Avoid vibration and shock
During storage, the Air Mover Blower should be protected from vibration and shock as much as possible. Vibration may cause internal parts to loosen or be damaged, and shock may cause the outer shell to deform or crack. Therefore, when choosing a storage location, ensure that the ground is stable and firm, and avoid placing the device in a place where it is easy to tip over or be impacted.